PRODUCT FEATURES: 產品特征：

This machine is a style of medium-sized ultra–low temperature frozen separator machine, independently developed based on the small-sized ultra–low temperature frozen separator machine according to users’ actual requests. The lowest temperature of the unit can reach up to -160℃ without using liquid Nitrogen as refrigerant. It is widely used to separate out glass, TP,back-light, OCA, LOCA, bracket from various damaged LCD modules (including phone, laptop, Ipad, TV, etc). It is really a good helper for the LCD screen reparation, rework, refurbishment, recycling industry. Our machines have the following characteristics:

本機是一款中型的超低溫冷凍分離機，是根據用戶的實際需要，在小型超低溫冷凍分離機的基礎上自主開發的。該機器的溫度可達-160℃，無需使用液氮作為制冷劑。它廣泛用于將分離玻璃、TP、背光、OCA、LOCA、支架等從各種損壞的液晶模組(包括手機、筆記本電腦、iPad、電視等)中分離出來。在液晶屏幕修復，返工，翻新，回收行業，它確實是一個很好的幫手。我們的機器有以下特點：

1.)Separate out glass from the damaged Laptop, IPad, phone LCD module.

1.) 從損壞的筆記本電腦、iPad、手機LCD模塊中分離出玻璃。

2.)Separate out OCA glue from the damaged Laptop, IPad, phone LCD module.

2.) 從損壞的筆記本電腦、iPad、手機液晶模塊中分離出oca膠水。

3.)Separate out TP from the damaged Laptop, IPad, phone LCD module.

3.) 將TP從損壞的筆記本電腦、iPad、手機液晶模塊中分離出來。

4.)Separate out back-light for IPhone, for Samsung, for LG, for IPAD Pro, for IPAD6, etc.

4.) 可以為iPhone、三星、LG、iPad Pro、iPad 6等品牌手機分離出背光。

5.)Separate out frame from the damaged Laptop, IPad, phone LCD module.

5.) 將支架從損壞的筆記本電腦、iPad、手機液晶模塊中分離出來。

6.)No need to change the polarizer film.

6.) 不需要更換偏光片

7.)Can keep the back-light (be careful, easily damaged), also can take offthe back-light.

7.) 可以保留背光(小心，容易損壞)，也可以取下背光。

8.)High efficiency. No components damage during the LCD module separating process.

8.) 效率高, 在液晶模塊分離過程中沒有元件損壞。

Operation Instructions: 操作說明

1.)Before using, it will take the machine around 30～40 minutes to cool to the set working temperature.

1.) 使用前，要花大約30~40分鐘左右讓機器冷卻至設定工作溫度。

2.)Place the LCD screen on the frozen plate.

2.) 將液晶屏放置在冷凍板上。

3.)Freezing time from 30 seconds to 1 minute depends on different LCD screens.

3.) 凍結時間從30秒到1分鐘取決于不同的液晶屏幕。

4.)Take out LCD screen and separate it.

4.) 取出液晶屏并將其分開。

5.)Below is the URL of Youku video link for your reference:

5.) 以下是優酷視頻鏈接的URL,供您參考/i/UMzYwNzc0OTg4NA==?spm=a2hzp.8244740.0.0

Tips: 提示

1.)For serious crushed glass, please stick a tape on glass for safety and good for machine

1.) 如有嚴重碎玻璃，請在玻璃上貼上膠帶，以確保安全及對機器有利。

2.)Please make sure the operator wears gloves in case of danger.

2.) 為防止發生危險，請確保操作人員戴手套。

3.)It is much easier to separate out the bracket and other components after freezing processing. Please pay attention to the back-light water inlet.

3.) 在冷凍處理后，更容易分離出支架和其它部件。請注意背光入水口。

4.)After separating the LCD screen, pay attention to the water treatment and temperature recovery.

4.) 液晶屏分離后，注意水的處理和溫度的回收。

5.)When separating the curved screen, the separation risk caused by the temperature difference between 2 sides of the curved surface screen. Please pay more attention to this point.

5.) 曲線篩分離時，由于曲面屏兩側溫差引起的分離風險。請注意這一點。

6.)After LCD separation, please put the glue side upward to avoid sticking on the article surface after the temperature return to the normal.

6.) 液晶顯示器分離后，請將膠水側向上放置，以避免雜物粘在膠水表面上，并且讓屏溫度恢復正常。

Product Parameters: