PRODUCT FEATURES: 產品特征：

At present, there are 3 kinds of methods (molybdenum wire cutting, liquid nitrogen freezing and refrigerator freezing) which are regularly used in LCD screen reworking industry.

目前液晶屏返修行業常用的方法有三種：鉬絲切割法、液氮冷凍法和冰箱冷凍法。

The efficiency of the molybdenum wire cutting method is very low and the relevant yield rate of LCD refurbishment is also very low.

目前液晶屏返工行業常用的方法有三種：鉬絲切割法、液氮冷凍法和冰箱冷凍法。

If users adopt liquid Nitrogen to separate the LCD screens, the consumption of liquid Nitrogen is too large and LCD screen explosion phenomenon will occur at any moment. On the other hand, injury hidden danger exists on the liquid Nitrogen during the LCD screen separating process.

如果用戶采用液氮分離液晶屏，液氮消耗過大，并且隨時都會出現液氮爆炸現象。另一方面，液晶屏分離過程中液氮存在損傷隱患。

Compared with the above mentioned 2 methods, LXBX series ultra low temperature frozen separator machine has many advantages in the LCD screen separation field. Its later use-cost is much lower than liquid Nitrogen, and it is also much more convenient and safer. In view of these advantages, LXBX series ultra low temperature frozen separator machine has been adopted by many LCD manufacturers and LCD maintenance enterprises because of its high yield rate of LCD refurbishment, low use-cost, no danger and other excellent characteristics as follows:

與上述兩種方法相比，LXBX系列超低溫冷凍分離機在液晶屏幕分離領域具有許多優點。其后期使用成本比液氮低得多，而且更方便、更安全。鑒于這些優點，LXBX系列超低溫冷凍分離機因其液晶顯示器翻新率高、使用成本低、無危害等優良特性，已被許多液晶顯示器制造商和維修企業所采用：

1.) Ease of operation,one-button start, high precision intelligent temperature control system,rapidly reach to the preset temperature.

1.) 操作方便，一鍵啟動，高精度智能溫控系統，快速達到預設溫度。

2.) Imported advanced refrigeration compressor and accessories, can run continuously for 24 hours, more stable refrigeration performance.

2.) 采用進口*的制冷壓縮機及附件，可連續運行24小時，制冷性能更穩定。

3.) Equipped with double sealing treatment top opening door and super thick thermal insulation layer box body, excellent thermal insulation performance,effectively reduce the loss of cooling capacity and greatly ensure the working temperature, energy saving, easy to operate.

2.) 配有雙層密封處理頂開門和超厚保溫層箱體，保溫性能優良，有效降低了冷卻能力的損失，極大地保證了工作溫度、節能、易操作。

4.) Safety electricity protection system equipped with ground wire, over heat protection, short circuit protection, over current protection, high & low voltage protection, reverse phase lack protection etc. Greatly ensure users’safety.

4.）配備有接地線、過熱保護、短路保護、過流保護、高低電壓，反向，缺相保護等安全用電保護系統, 極大地的保證用戶安全。

5.) Easy to operate, can provide operation instruction, pictures and videos for users.

5.) 操作簡單，可為用戶提供操作指導，圖片和視頻。

6.) Compared with heater vacuum separator, ultra-low temperature frozen LCD separator can help you easily solve your headache about bulk volume separating workload and edge screen separating, it can also peel off a lot of OCA, LOCAglue except for SCA glue.

6.) 與加熱器真空分離器相比，超低溫冷凍LCD分離器可幫助您輕松解決巨量的分離工作量和邊緣屏幕分離的難題，除了SCA膠水之外，它還可以剝離很多OCA、LOCA膠。

7.) No need to change the polarizer film.

7.) 不需要更換偏光片

8.) Can keep the back-light (be careful, easily damaged), also can take off theback-light.

8.) 可以保留背光(小心，容易損壞)，也可以取下背光。

9.) High efficiency. No components damage during the LCD module separating process.

9.) 效率高, 在液晶模塊分離過程中沒有元件損壞。

Operation Instructions: 操作說明

1.) Before using, it will take the machine around 30～40 minutes to cool to the set working temperature.

1.) 使用前，要花大約30~40分鐘左右讓機器冷卻至設定工作溫度。

2.) Place the LCD screen on the frozen plate.

2.) 將液晶屏放置在冷凍板上。

3.) Freezing time from 30 seconds to 1 minute depends on different LCD screens.

3.) 凍結時間從30秒到1分鐘取決于不同的液晶屏幕。

4.) Take out LCD screen and separate it.

4.) 取出液晶屏并將其分開。

5.) Below is the URL of youtube video link for your reference:

5.) 以下是優酷視頻鏈接的URL，供您參考：

/i/UMzYwNzc0OTg4NA==?spm=a2hzp.8244740.0.0

Tips: 提示

1.) For serious crushed glass, please stick a tape on glass for safety and good for machine

1.) 如有嚴重碎玻璃，請在玻璃上貼上膠帶，以確保安全及對機器有利。

2.) Please make sure the operator wears gloves in case of danger.

2.)為防止發生危險，請確保操作人員戴手套。

3.) It is much easier to separate out the bracket and other components after freezing processing. Please pay attention to the back-light water inlet.

3.) 在冷凍處理后，更容易分離出支架和其它部件。請注意背光入水口。

4.) After separating the LCD screen, pay attention to the water treatment and temperature recovery.

4.) 液晶屏分離后，注意水的處理和溫度的回收。

5.) When separating the curved screen, the separation risk caused by the temperature difference between 2 sides of the curved surface screen. Please pay more attention to this point.

5.) 曲線篩分離時，由于曲面屏兩側溫差引起的分離風險。請注意這一點。

6.) After LCD separation, please put the glue side upward to avoid sticking on the article surface after the temperature return to the normal.

6.) 液晶顯示器分離后，請將膠水側向上放置，以避免雜物粘在膠水表面上，并且讓屏溫度恢復正常。

Product Parameters: