當前位置：上海榮計達儀器科技有限公司>>試驗機系列>>榮計達地坪耐磨試驗機操作規程UM-III

榮計達地坪耐磨試驗機操作規程UM-III

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號UM-III

品牌

廠商性質其他

所在地

在線詢價收藏產品

聯系方式：王林查看聯系方式

更新時間：2024-02-19 21:54:37瀏覽次數：264次

聯系我時，請告知來自食品機械設備網

產品分類 品牌分類

暫無信息

上海榮計達儀器科技有限公司

經營模式：其他

商鋪產品：21條

所在地區：

聯系人：王林

詢價 給他留言

產品簡介

一、產品簡介：

詳細介紹

一、產品簡介：
地坪耐磨試驗機適用于水泥基自流平地面面層現場耐磨試驗，也可以用于砂漿及找平層耐磨性的測定，地坪耐磨試驗機采用伺服電機驅動，3鋼制磨輪摩擦，輪圍繞磨頭圓盤沿環形軌跡滾動，模擬了地坪使用過程中嚴重的一種磨損情況，即鋼輪在拐彎處對地面的磨損，更為直觀的體現地坪材料在現場使用中的耐磨性能。
1. Product introduction: The floor abrasion tester is suitable for the on-site abrasion test of cement-based self-leveling ground surface, and can also be used for the determination of the abrasion resistance of mortar and screed. The floor abrasion tester is driven by a servo motor with 3 steel grinding wheels. , The wheel rolls around the grinding head disc along a circular trajectory, which simulates a serious wear situation during the use of the floor, that is, the wear of the steel wheel on the ground at the corner, which more intuitively reflects the level of the floor material in the field. Wear resistance.

二、技術參數：
1、磨輪數量：3個均布
2、轉速：0-200 rpm
3、磨輪自轉直徑：76mm
4、磨輪寬度：20mm
5、磨輪組繞軸旋轉直徑：225mm
6、磨輪表面硬度：735HV
7、配重：65±0.5kg
8、計數范圍：0-9999轉
2. Technical parameters: 1. Number of grinding wheels: 3 uniformly distributed 2. Speed: 0-200 rpm 3. Rotation diameter of grinding wheel: 76mm 4. Grinding wheel width: 20mm 5. Rotation diameter of grinding wheel group around axis: 225mm 6. Surface hardness of grinding wheel: 735HV 7. Counterweight: 65±0.5kg 8. Counting range: 0-9999 revolutions

三、特點：
伺服電機驅動：轉速可調（用于科研）。主機體積小，重量輕，不丟轉。
驅動器內置：防止運輸時磕碰損壞。
配重與主機可分離，便于運輸。
配重與主機設可靠順滑導向和定位，保證碾輪與地面間壓力準確。
控制器與主機可分離，便于運輸，一航插連接。
3. Features: Servo motor drive: adjustable speed (for scientific research). The host is small in size, light in weight, and does not lose power. Built-in drive: to prevent damage from bumps during transportation. The counterweight and the host can be separated for easy transportation. The counterweight and the main engine are equipped with reliable and smooth guidance and positioning to ensure accurate pressure between the roller and the ground. The controller and the host can be separated, which is convenient for transportation.

關鍵詞：耐磨試驗機試驗機

其他推薦產品更多>>