| 中 | 可程式/經濟型恒溫恒濕/高低溫試驗機 | | | | | | | |
| 英 | PROGRAMMABLE/CHEAP TEMPERATURE & HUMIDITY/HIGH LOW TEMPERATURE CHAMBER | | | | | | | |
| | | | | | |
| | 1.箱體采用CNC數位工作母機成型，圓弧造型美觀大方，并采用平面無反作用把手，操作容易。 | | | | | | | |
| | | | | | |
| 2.箱體內外部材質采用不銹鋼（SUS#304)，外部更施於環氧樹脂涂裝，以增加外觀質感及潔凈度。 | | | | | | | |
| | | | | | |
| 3.補水箱置控制箱體前側的下部，外拉式水箱的設計，更便利操作補充水源。 | | | | | | | |
| | | | | | |
| 4.大型觀測視窗附照明保持箱內明亮，且利用發熱體內嵌式玻璃，隨時堡持清晰的觀測箱內的狀況。 | | | | | | | |
| | | | | | |
| 5.加濕系統管路歟控制電路板之間增設集水盤，可避免因管路漏水影響電路，提高安全性。 | | | | | | | |
| | | | | | |
| 6.箱體堡溫層采用高強度PU發泡樹脂歟高密度之玻璃纖維棉，厚度10公分可避免不必要之能量損失。 | | | | | | | |
| | | | | | |
| 7.箱體左側具一直徑50mm之測試孔，可供外接測試電源線或信號線使用。 | | | | | | | |
| | | | | | |
| 可程控制器 | 1.采用HONEYWELL IPC-1000超感度液晶（LCD)顯示觸控式熒幕畫面，熒幕操作簡單，程式編輯容易。 | | | | | | | |
| | | | | | |
| 2.控制器操作界面設中、英、韓三國文字可供選擇，且即時運轉之曲線圖可由熒幕顯示。 | | | | | | | |
| | | | | | |
| 3.具有30組程式800段999CYCLE步驟之容量，每段時間設定99小時59分。 | | | | | | | |
| | | | | | |
| 4.具有10組程式串，每串可聯結6組程式，每組程式中最多可設定５組副程式做循環。（999次） | | | | | | | |
| | | | | | |
| 5.資料及試驗條件輸入后，控制器具有熒幕Lock鎖定功能，避免人為觸摸而停機。 | | | | | | | |
| | | | | | |
| 6.具有P.I.D自動演算功能，可將溫濕度變化條件立即修正，而使溫濕度之控制更為精確穩定。 | | | | | | | |
| | | | | | |
| 7.具有RS-232通訊界面及連線軟件，可于電腦上設計程式、監視試驗過程并執行開關機等功能。 | | | | | | | |
| | | | | | |
| 8.具有9點故障訊息顯示，于運轉中發生異常狀況，即刻切斷電源，并于熒幕上即時顯示故障原因。 | | | | | | | |
| | | | | | |
| 9.具有4組時序訊號接點，可使運轉過程中，對外輸出控制接點，提供使用者進行動態試驗。（選配） | | | | | | | |
| | | | | | |
| 10.可提供溫濕度線性直流信號輸出至溫濕度記錄器，以了解測試條件之狀態，進而提高檢測信賴度。 | | | | | | | |
| | | | | | |
| 冷凍及風躍系統 | 1.冷凍機采用法國鐵甲武士壓縮機，并使用環保冷煤（R134a、R404a、R23） | | | | | | | |
| | | | | | |
| 2.冷凍系統采用二元式低溫回路系統設計，并于不同溫域采用不同壓縮機作功，翠增加設備使用壽命。 | | | | | | | |
| | | | | | |
| 3.利用多翼式送風機強力送風循環，避免任何死角，可使測試區內溫濕度分布均勻。 | | | | | | | |
| | | | | | |
| 4.風路循環采用側吹出風回風設計、風壓、風速皆符合試驗標準，并可使閘門瞬間溫濕度回穩時間快 | | | | | | | |
| | | | | | |
| 5升濕、降溫、加濕、除濕系統*獨立可提高效率，降低測試成本，增長壽命，減低故障率。 | | | | | | | |
| | | | | | |
| 選購配件 | 1.隔層架 (SHELVES) | | | | | | | |
| 2.測試孔 (CABLE PROT) | | | | | | | |
| 3.液態氮噴射裝置 (LIQUID N2 INJECTION) | | | | | | | |
| 4.自動補水系統 (WATER SUPPLY SUBSYSTEM) | | | | | | | |
| 5.低濕除濕系統 (LOW HUMIDITY DEHUMIDIFIER) | | | | | | | |
| 6.純水處理裝置 (REVERSE OSMOSIS WATER PURIFIER) | | | | | | | |
| 7.溫濕度記錄器 (TEMPERATURE AND HUMIDITY RECORDER) | | | | | | | |
| | | | | | | | | | | | | | | | | | | | | |
| 型號 | TH/WCT-1P(S)-A(B,C,D,E) | TH/WCT-2P(S)-A(B,C,D,E) | TH/WCT-3P(S)-A(B,C,D,E) | TH/WCT-4P(S)-A(B,C,D,E) |
| 測試區尺寸 | 45×60×45 | 50×75×60 | 80×80×80 | 100×100×100 |
| Internal Dim. |
| 外型尺寸 | 108×145×80 | 113×160×95 | 143×165×115 | 163×185×135 |
| External Dim. |
| 工作溫度范圍 | 100℃（+150℃）～-70℃（A:0℃、B:-20℃、C:-40℃、D:-60℃、E:-70℃ |
| Temp. Range |
| 相對濕度范圍 | 20％～98％R.H. |
| Relative humidity Range |
| Features | 機器性能 | 解析精度 | TH-P:溫度0.01℃，溫度0.1％R.H.：TH-S/WCT-P/WCT-S:溫度0.1℃，溫度0.1％R.H. |
| Indication Resolution | TH-P:Temp.0.1℃，Humi.0.1%R.H.:TH-s/wct-P/wct-s:Temp.0.1℃，Humi.0.1%R.H. |
| 控制精度 | 溫度：±0.3℃；溫度：±2.5％R.H. |
| Temp.& Humi.Constancy | Temp.:±0.3℃；Humi.：±2.5％R.H. |
| 升溫時間 | ℃ | 100 | 100 | 100 | 100 |
| Heat-up time | min | 35 | 40 | 50 | 50 |
| 降溫時間 | ℃ | 0 | -20 | -40 | -60 | -70 | 0 | -20 | -40 | -60 | -70 | 0 | -20 | -40 | -60 | -70 | 0 | -20 | -40 | -60 | -70 |
| Pull-down time | min | 30 | 45 | 50 | 60 | 90 | 30 | 45 | 50 | 60 | 90 | 30 | 45 | 50 | 60 | 100 | 30 | 45 | 50 | 60 | 120 |
| Material | 材質 | 外部材質 | SUS#304不銹鋼板+粉體涂裝 |
| External | SUS#304 stainless steel plate + Trituration Coating |
| 內部材質 | SUS#304不銹鋼板 |
| Internal | SUS#304 stainless steel plate |
| 隔熱材質 | PU及隔熱棉 |
| Insulation | PU & Fiberglass wool |
| Systems | 系統結構 | 循環系統 | 多翼式循環風扇 |
| Circulation | Siroco fan |
| 加熱系統 | SUS#304不銹鋼高速電熱器 |
| Heating | SUS#304 stainless steel high-speed heater |
| 加濕方式 | 表面蒸發方式 |
| Humidifying | Surface evaporating system |
| 冷卻系統 | 歐美原裝壓縮機+鰭片式蒸發器+氣冷式冷凝器 |
| Cooling | Airtight compressor + evaporator fins +air-cooling condenser |
| 除濕方式 | ADP臨界路露點冷卻除濕方式 |
| Dehumiditying | ADP Critical dewpoint cooling/dehumiditying method |
| 控制系統 | TEMI |
| 其他配件 | 多層強化玻璃視窗、測試孔（¢50MM)、動作指示燈、箱內照明、隔層置物架(兩個) |
| Other components | Vacuum glass inspection window, cable port(¢50mm), control status indicator lights, chamber lamp, experiment separation shelves(freely adjustable 2 pcs). |
|
| 安全裝置 | 電路系統負載保護、壓縮機負載堡護、控制系統負載保護、加濕系統負載保護、超溫負載保護、故障警示燈 |
| Savety devices | Overheating prevention circuit-breaker, compressor overload protection, control system overload perevention, humiditying system overheating, drying out prevention, breakdown indicator light. |
|
| 電源(AC1ф,220V，50Hz) | | | | A | 25 | 30 | 30 | 30 | 30 | 30 | 30 | 30 | 30 | 30 | 30 | 45 | 60 | 60 | 60 | 30 | 45 | 60 | 60 | 60 |
| Power Source |
| 電源(AC3ф,380V，50Hz) | | | | A | | | | | | | | | | | | 30 | 45 | 45 | 45 | 30 | 45 | 45 | 45 | 45 |
| Power Source |
| | | | | | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | | | | | | | | | | |
| 恒溫恒濕英文資料 |
| PROGRAMMABLE TEMPERATURE & HUMIDITY CHAMBER |
| 1. Hight capacity programming memory |
| *Can store up to 99 programs,each with up to 700 segments, |
| Which can be repeated up to 999 times; segments and programs |
| Can be joined and separated. |
| *Simultaneously remembers up to 99 programs. Segments can be |
| Repeated in the middle of programs. |
| *Can Temp & Humi. One or many patterns of operating conditions, |
| Up to 700 different settings of temperature, humidity and duration. |
| *Electrical failure memory is activated in power outages, to that |
| Program resures when power is restored. |
| *Can store and indicate total elapsed time. |
| *Automatic self-adjustment follows temperature and humidity patterns. |
|
| 2. Convenient operation |
| *Microprocessor guides you step by step through the programming, |
| And signals possible programming errors. |
| *New settings are automatically saved in memory. Settings can be |
| Stored for up to 5 years. |
| *Each control parameter can be controlled separately during operation, |
| For example: power output, cycle countdown, rate of change, |
| Or temperature, etc. |
| *Programs can be “l(fā)ocked" to prevent accidental resetting. |
|
| 3. Special Control Functions |
| *The rate of temperature change can be preset in the program. |
| *A Timer signal output relay enables results from every step of the |
| Process to be conveyed to all necessary peripheral devices. |
| *All heating, cooling, humidifying and dehumidifying elements are |
| Controlled by a microprocessor which executes all temperature and |
| Humidity commands. |
|
| Option |
| *Through RS232C serial ports, computers can be attached for control |
| And information management. |
| *An automatic temperature and humidity recording device can be |
| Connected to increase the reliability of the test. |
| *The control unit may be physically separated from the testing |
Bitmap | Chamber for remote control operation. |
|
| | | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | | | | | | | | | | | | | | | | | |
| Mode | TH-1P- | TH-2P- | TH-3P- | TH-4P- |
| Inter Dim.W×H×D(cm) | 40×50×40 | 45×60×45 | 50×75×60 | 100×100×80 |
| External Dim.W×H×D(cm) | 92×130×70 | 97×140×75 | 102×155×90 | 152×180×110 |
| Temp. Range | -70℃~100℃(+150℃)(A:0℃ B:-20℃ C:-40℃ D:-60℃ E:-70℃ |
| *RelativeHumildity Range | 20%~98%R.H. |
| Features | Temp. & huml.constancy | ±0.3℃；±2.5%℃ |
| Temp. & humi. uniformity | ±0.5℃; ±4%R.H. |
| Indication resolution | 0.1℃;0.1%R.H./0.01℃;0.1%R.H. |
| Heat-up time (min.) | About 30 to 50 |
| Pull-down time (min.) | About 45 to 120 |
| Material | Exterior | SUS#304 stainless steel plate |
| Interior | SUS#304 stainless steel plate |
| Insulation | PU & Fiberglass wool |
| Systems | Circulation | Siroco fan |
| Heating | SUS#304 stainless steel high-speed heater |
| Humidifying | Surface evaporating system |
| Cooling | Airtight compressor+evaporator fins+air-cooling condenser |
| Dehumidifying | ADP Critical dewpoint cooling/dehumidifying method |
| Control | Digital electronic indicators, programmable computer controller+S.S.R. |
| Other components | Vacuum glass inspection window, cable p：ort(Φ35mm),control status indicator lights, chamber lamp, experiment separation shelves (freely adjustable 2 pcs). |
| Savety devices | Overheating prevention circuit-breaker,compressor overload protection, control system overload prevention, humidifying system overheating and drying out prevention, breakdown indicator light. |
| Power source | AC 1Φ/3Φ,220V±10%,50/60HZ. |
| | | | | | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | | | | | | | | | | |
| 恒溫恒濕 恒溫恒濕試驗機 恒溫箱 恒溫恒濕箱 恒溫恒濕機 恒溫恒濕試驗箱 LED專用恒溫恒濕機 | | | | | | | | | |
