 |
廣州澤爾機電科技有限公司
主營產品： 德國ziehl繼電器、溫控器 |
會員1.png)
|
廣州澤爾機電科技有限公司
主營產品： 德國ziehl繼電器、溫控器 |
2016-8-26 閱讀(443)
廣州澤爾機電科技有限公司是德國ziehl在中國的*辦事處，負責正規渠道的銷售和服務，產品劉。
Pt 100 temperature relay for up to 12 sensors with electric 10 MBit/s Ethernet interface
Pt100溫度繼電器可接多達12個傳感器，并帶有10MB/s的電子網絡接口
Order-number廠家訂貨號
T224078
AC/DC 24-240 V
Approvals認證有：
The TR1200IP can be used wherever multiple Pt 100 sensors (up to 12) need to be evaluated simultaneously:
TR1200IP能用在任何并聯的Pt100傳感器（多達12個）需要同時評估的地方。
· Motors or generators,馬達或者電機
· also with simultaneous monitoring of bearings or, e.g., exhaust temperatures同樣可用于同時監測軸承溫度或者排氣溫度。
· Transformers, also with additional core-temperature monitoring變壓器，還能監測其內核溫度。
· Machines and plants機器和工廠。
Type TR1200IP temperature relays register the temperature of up to 12 sensors simultaneously and provide the values to the electric 10 MBit/s Ethernet interface. 2 IP protocols are supported, so the registered temperatures can be subsequently evaluated by connected devices that are linked with the TR1200IP via an Ethernet network.
TR1200IP溫度繼電器可同時記錄多達12個傳感器的溫度，并把這些數值傳供給10MB/s的電子網絡接口，支持2路IP協議，因此這些記錄的溫度隨后能夠被連接的設備進行評估，這些設備通過因特網與TR1200IP連接。
In motors, that could be a motor contactor, in transformers a transformer contactor with integrated overload function and thermal monitoring. An alarm relay reports devices and sensor errors. Sensor breaks or sensor short-circuits are also transmitted via the protocol to the connected evaluation unit.
在電機里，TR12000IP可為一個電機接觸器；在變壓器里，可為一個帶綜合超載功能和熱量監測的變壓器接觸器。一個報警繼電器可報告裝置和傳感器的錯誤。傳感器失靈或傳感器短路同樣會通過通訊協定傳遞給連接的評估單元。
· 3-digit digital display for the temperature of up to max. 12 measuring points
· 3位數數字顯示，顯示zui多至12個測量點的溫度。
· 12 sensor inputs; 1…12 sensors can be connected
· 12路傳感器輸入，1-12傳感器可連接。
· Pt 100 in 2- or 3-wire technology, when connecting Ni100 or Ni120, conversion to the correct temperature in the evaluation unit is required, SIPROTEC devices from Siemens (e.g. 7SK80) support this function. The EN100 module in the SIPROTEC 4 units does not support the TR1200 IP.
· 1 alarm relay (1 change-over contact)
· Electric 10 MBit/s Ethernet interface (RTD IP protocol from ZIEHL, or Modbus IP protocol)
· Read-out display, configuration, simulation and firmware update via Web browser
· Tested with Mozilla Firefox 3.5 and Microsoft Internet Explorer 8.0
· LEDs for measurement allocation, error, relay status and Ethernet interface
· Code protection against manipulation of the setpoint values
· Wide area power supply AC/DC 24…240 V
· Distributor housing for panel mounting 8 TE, front-to-back size 55 mm
· Mounting on 35mm DIN EN 60715 standard rail
Rated Supply Voltage Us
.......
AC/DC 24-240 V, 0/45...65 Hz, < 5 VA
DC: 20,4...297 V, AC: 20,4...264 V
Relay output
.......
1 change-over contact (CO)
Type 2, see general technical information
Measuring inputs
.......
12 x Pt100 (RTD) according to EN 60 751 / IEC 60 751
Measuring time sensor
.......
0,25...3s (depending on number of sensors)
Measuring range
.......
-199°...850°C
Resolution
.......
1°C
Tolerance
.......
± 0,5% of value ± 1 K
Sensor-current
.......
≤ 0,8 mA
Ethernet interface
IP-adress
.......
selectable
Subnet mask
.......
selectable
UDP Port
.......
selectable 0...65535
Max. cable-length
.......
max. 20 m with CAT 5 patch-cable
Max. response time
.......
200 ms
Testing conditions
.......
see general technical information
Rated ambient temperature range
.......
-20°C...+65°C
Housing
.......
Design V8
Dimensions (w x h x d)
.......
140 x 90 x 58 mm, mounting height 55 mm
Protection housing/terminals
.......
IP 30 / IP 20
Attachment
.......
DIN-rail 35 mm acc. to EN 60715 or screws M4
Gewicht
.......
ca. 350 g
