食品機械設備網
詳細介紹
量程范圍：1至1000 Bar
標準輸出信號：0...10VDC(3線)/4...20 mA(2線)
小尺寸KS壓力傳感器
不銹鋼防潮部件KS壓力傳感器
SIL2 認證KS壓力傳感器
KS壓力傳感器基于放在不銹鋼膜片上的薄膜敏感元件。KS壓力傳感器
由于的SMD電子元件和緊湊設計,這些壓力變送器堅固耐用和高度可靠,以SIL2認證作為標準。KS壓力變送器適用于所有的工業應用, 特別針對液壓領域 (壓縮機,汞, 動力單元,移動液壓系統,等等.) 同時適用于多種惡劣條件,通?？梢缘挚垢咚降臎_擊、振動、壓力和溫度峰值。
| Output signal | VOLTAGE | CURRENT |
| Non Linearity (BFSL) | ± 0.15% FS (typ) ± 0.25% FS (max) | |
| Hysteresis | + 0.1% FS (typ) + 0.15% FS (max) | |
| Repeatability | ± 0.025% FS (typ) ± 0.05% FS (max) | |
| Zero offset tolerance | ± 0.15% FS (typ) ± 0.25% FS (max) | |
| Span offset tolarance | ± 0.15% FS (typ) ± 0.25% FS (max) | |
| Accuracy at room temperature (1) | < ± 0.5% FS | |
| Pressure ranges (2) | From 1 bar to 1000 bar (See table) | |
| Resolution | Infinite | |
| Overpressure (without degrading performance) | See table | |
| Pressure containment (burst test) | See table | |
| Pressure Media | Fluids compatible with Stainless Steel AISI 430F and 17-4 PH | |
| Housing | Stainless Steel AISI 304 | |
| Power supply | 15...30Vdc | 10...30Vdc |
| Dielectric strenght | 250 Vdc | |
| Zero output signal | 0 V (N); 0.1 V (C) | 4 mA (E) |
| Full scale output signal | 10 V (N); 10.1 V (C) | 20 mA (E) |
| Allowed load | ≥ 5KΩ | see load diagram |
| Long term stability | < 0.2% FS/per year | |
| Operating temperature range (process) | -40...+125°C (-40...+257°F) | |
| Operating temperature range (ambient) | -40...+105°C (-40...+221°F) | |
| Compensated temperature range | -20...+85°C (-4...+185°F) | |
| Storage temperature range | -40...+125°C (-40...+257°F) | |
| Temperature effects over compensated range (zero) | ± 0.01% FS/°C typ. (± 0.02% FS/°C max.) | |
| Temperature effects over compensated range (span) | ± 0.01% FS/°C typ. (± 0.02% FS/°C max.) | |
| Response time (10...90%FSO) | < 1 msec. | |
| Warm-up time (3) | < 30 sec. | |
| Mounting position effects | Negligible | |
| Humidity | Fino a 99%RH non-condensing | |
| Weight | 80-120 gr. nominal | |
| Mechanical shock | 100g/11msec according to IEC 60068-2-27 | |
| Vibrations | 20g max at 10...2000 Hz according to IEC 60068-2-6 | |
| Ingress protection | IP65/IP67 | |
| Output short circuit ａnd reverse polarity protection | YES | |
| CE Conformity | According to EC Directive 2004/108/CE | |
| FS = Full scale 1 Incl. Non-Linearity, Hysteresis, Repeatability, Zero-offset and Span-offset (acc. to IEC 61298-2) 2 The 3 Time within which the rated performance is achieved | ||
| 產品選型 | |||||||
| 信號輸出 | |||||||
| C 0.1...10.1 Vdc | |||||||
| E 4...20 mA | |||||||
| N * 0...10 Vdc | |||||||
| | | PRESSURE CONNECTION | ||||||
| | | E (DIN 3852-E) | ||||||
| | | 3 G1/2 gas male (DIN 3852-E) | ||||||
| | | | | C DIN (P8) | |||||
| | | | | Z 4 pin connector M12x1 | |||||
| | | | | 4-pin connector DIN | |||||
| | | | | | | MEASUREMENT RANGE RANGE | ||||
| | | | | | | bar barbar bar | ||||
| | | | | | | B01U 1* B04D 401* B04D 40 | ||||
| | | | | | | B1V6 1.6* B06D 601.6* B06D 60 | ||||
| | | | | | | B02U 2* B01C 1002* B01C 100 | ||||
| | | | | | | B2V5 2.5* B16D 1602.5* B16D 160 | ||||
| | | | | | | B04U 4* B02C 2004* B02C 200 | ||||
| | | | | | | B06U 6* B25D 2506* B25D 250 | ||||
| | | | | | | B01D 10 B04C 40010 B04C 400 | ||||
| | | | | | | B16U 16 B06C 60016 B06C 600 | ||||
| | | | | | | B02D 20 B01M 100020 B01M 1000 | ||||
| | | | | | | B25U 25 25 | ||||
| | | | | | | * SIL certification not available | ||||
| | | | | | | | | ACCURACY | |||
| | | | | | | | | M ±0.5%FS | |||
| | | | | | | | | | | RESPONSE TIME | ||
| | | | | | | | | | | V Fast (< 1 msec) | ||
| | | | | | | | | | | | | Mechanical and/or electrical characte- ristics differing from standard may be arranged on request. | |
| KS | E | 3 | C | B02D | M | V | |
| Instruments manufactured by Gefran are calibrated against precision pressure calibration equipment wich is traceable to International Standards. |
| ||
| Ex: KS - E - E - C - B04C - M - V Pressure transmitter KS with 4 to 20 mA output signal, G1/4 male (DIN 3852-E) pressure connection, microDIN electrical connector, 0...400 bar pressure range, ± 0.50% FS accuracy, 1 msec response time. Sensors are manufactured in compliance with: - EMC 2004/108/CE Compatibility Directive - RoHS 2002/95/CE Directive - 2006/42/CE Machinery Directive | |||
TPS壓力變送器
量程：從0...10 bar到0...1000 bar
（從0...150psi to 0...15000psi)
準確度：± 0.15% FSO 典型
防護等級：IP65/IP67
防濕部件17-4PH
溫度范圍：-40...+120°C
TPS系列變送器基于應變片粘合在不銹鋼上的技術。
創新的機械結構使傳感器在安裝中對擰緊不敏感。
此傳感器適合用于堅固性，可靠性和有高精度要求的應用場合。
| 產品選型 | PRESSURE CONNECTION | ||||||
| ELECTRICAL CONNECTION | |||||||
| Standard | |||||||
| G 1/4 gas male | 1 | 4-pole connector solenoid | E * | ||||
| On request | shielded cable | F | |||||
| 7/16-20 UNF-2A male (SAE 4 for AS4395-E) | 2 | 4-pole connector | Z * | ||||
| G 1/2A (DIN 16288) | 3 | 4-pole connector microsolenoid | M * | ||||
| G 1/4 gas female | 4 | 7 pole connector | P | ||||
| 1/8-27 NPT female | 5 | 6 pole connector | V | ||||
| 1/4-18 NPT female | 6 | | | |||||
| 1/4-18 NPT male | 7 | | | |||||
| M14 x 1.5 male | 8 | | | B01D B16U B02D C C | ||||
| 1/8-27 NPT male | 9 | | | B25B25U B03D B35U DB25B25U B03D B35U D | ||||
| G 1/4 male (DIN 3852-E) | E | | | B35D B04C B05CMB35D B04C B05CM | ||||
| <, /TD> | M12 x 1.5 male | R | | | P15D P25D P03CP15D P25D P03C | |||
| 7/16-20 UNF-2A male (SAE 4 for J1926-2) (*) | K | | | P05C P75DP05C P75D | ||||
| 7/16-20 UNF-2A female (SAE 4) | F | | | P01M P15CCP01M P15CC | ||||
| | | | | P10M P15MP10M P15M | |||||
| | | | | P02M P25C | |||||
| | | | | P03M P04M | |||||
| | | | | P05M P75C | |||||
| | | | | B06C B07C B01M | |||||
| | | | | B04D B05D B06D | |||||
| | | | | B01C B16D B02CD | |||||
| | | | | | | ACCURACY | ±0.15% FSO typical >200bar/3000psi | |||
| | | | | | | T | ||||
| | | | | | | ±0.25% FSO typical ≤200bar/3000psi | ||||
| | | | | | | | | Mechanical and/or electrical characte- ristics differing from standard may be arranged on request. | |||
| TPS | 1 | E | B01D | T | |||
Ex.: TPS - 4 - V - B07C - T
Pressure transducer TPS with G 1/4 female process connection, 6 pole connector, 0...700 bar measurement range,
± 0.15% FSO accuracy.
| Accuracy (1) | ± 0.15% FSO ± 0.25% FSO typical; ± 0.5% FSO max ≤200bar/3000psi |
| Resolution | Infinite |
| Overpressure (without degrading performance) (2) | See table |
| Pressure containment (Burst test) (3) | See table |
| Wetted parts | Fluid compatible with INOX 17-4PH Stainless Steel |
| Body mate, rials | INOX AISI 304 Stainless Steel ａnd Nylon 66GF35V0 |
| Power supply | 10 (max 15) Vdc/ac RMS |
| Common mode voltage | Typical 5V @ 10V supply |
| Output impedance | 350 Ω (± 1) |
| Load impedance | > 1000 KΩ |
| Insulation resistance | > 1000 MΩ @ 50Volt |
| Zero offset and span setting | ± 0.5% FSO |
| Output voltage (sensitivity) | 10...40bar / 150...500psi 1,5mV/V 50...60bar / 750...1000psi 2mV/V 100...1000bar / 1500...15000psi 3mV/V |
| Long term stability | < 0.1% FSO per year |
| Operating temperature range (process) (5) | -40...+120°C (-40...+248°F) |
| Compensated temperature range (4) | -20...+85°C (-4...+185°F) |
| Storage temperature range | -40...+125°C (-40...+257°F) |
| Temperature effects over compensated range (zero-span) | ± 0.01% FSO/°C typical (± 0.02% FSO/°C max.) |
| Mounting position effects | Negligible |
| Humidity | Up to 99% RH non condensing |
| Weight | 130 gr. nominal |
| Mechanical shock | 100 g / 11 msec. according to IEC 60068-2-27 |
| Vibrations | 20 g max @ 10-2000Hz according to IEC 60068-2-6 |
| Ingress protection | IP65/IP66/IP67 |
FSO = Full Scale Output
1 Includes combined effects of Non-Linearity BFSL (Best Fit Straight Line), Hysteresis and Repeatability
2 tested for more than 1000 strokes with single duration < 2msec.
3 tested for more than 100 strokes with single duration < 2msec.
4 temperature outside compensated range may cause zero signal drift
5 ambient and/or electronics part temperature must not exceed 105°C
食品機械設備網