進口鍛鋼止回閥(德國OLES奧萊斯閥門)
【進口鍛鋼止回閥】詳細說明：
進口鍛鋼止回閥有三種體蓋連接設計形式。*種是螺栓式閥蓋：按這種設計形式設計的閥門，其閥體與閥蓋用螺栓螺母連接，纏繞式墊片(316夾柔性石墨制造)密封?？蛻粲刑厥庖髸r(shí)也可采用金屬環連接。第二種設計形式是焊接式閥蓋，按這種設計形式的閥門，其閥體與閥蓋用螺紋連接，全焊密封?？蛻粲刑厥庖髸r(shí)也可采用透焊連接。第三種是壓力自緊式閥蓋，按這種設計形式設計的閥門，其閥體與閥蓋用螺紋連接，內壓自密環密封。
Imported forged steel check valves have three types of cover connection design. The first is bolted bonnet: a valve designed according to this design form is connected with the bonnet by bolts and nuts and sealed by winding gaskets (316 clamps of flexible graphite). Metal rings can also be used when customers have special requirements. The second design form is welded bonnet. According to this design form, the valve body and bonnet are connected by threads, and the valve is fully welded and sealed. Permeable weld connection can also be used when customers have special requirements. The third type is pressure self-tightening valve cover, which is designed according to this design. The valve body and cover are connected by threads, and the inner pressure self-tightening ring is sealed.
【進口鍛鋼止回閥】安裝說明：
鍛鋼止回閥要注意閥體排污和絲堵泄壓?jiǎn)栴}。閥門試驗后，密封腔閥腔內氣體和水分因環境溫度升高而升壓，注脂時要*行排污泄壓，以利于注脂工作的順利進行。注脂后密封腔內的空氣和水分被充分置換出來。及時泄掉閥腔壓力，也保障了閥門使用安全。注脂結束后，一定要擰緊排污和泄壓絲堵，以防意外發生。注脂時，要注意出脂均勻的問題。正常注脂時，距離注脂口近的出脂孔先出脂，然后到低點，后是高點，逐次出脂。如果不按規律或不出脂，證明存在堵塞，及時進行清通處理
【進口鍛鋼止回閥】特點：
1、鍛鋼止回閥主要零部件采用精密模鍛件，外形美觀，結構緊湊;
2、閥蓋采用螺栓栓接、焊接連接、壓力自密封結構，可根據客戶要求自由選用;
3、螺紋、焊接、法蘭多種連接方式可選.
產品特性：
本閥又稱升降式止回閥是壓力自緊式閥蓋,該設計形式設計的閥門,其閥體與閥蓋用螺紋連接,內壓自密環密封.設計是升降式結構。
