產品名稱:衛生級快裝呼吸閥,食品級呼吸閥,不銹鋼儲罐呼吸閥I無菌呼吸閥
產品產地:溫州
產品介紹:英文介紹:
Breathing valve to maintain the the tank pressure balance, safety and energy saving products to reduce the evaporation of the medium, to take full advantage of the pressure of the tank itself breathing valve to reduce the medium emissions, its principle is to use the weight of the positive and negative pressure valve disk to control the tank platoonair positive pressure and negative pressure of suction. When the tank pressure of the medium in the breathing valve control operation of the pressure range within the breathing valve is not working, to maintain the tightness of the oil tank; medium supplemented to the tank, the tank upper portion of the gas space increased pressure to achieve breathing operation of the valve when the positive pressure, the pressure valve is open the top and the call outlet escape of gas from the breathing valve, so that the pressure in the tank is not continue to increase; decline in pressure when the extraction medium, so that an衛生級快裝呼吸閥,食品級呼吸閥,不銹鋼儲罐呼吸閥I無菌呼吸閥 upper gas space of the tank to the outside of the tank, to achieve the breathing valve operating negative pressure outside the atmosphere in the tank top open breathing valve negative pressure valve disc to open the top, so that the outside air into the tank, so that the pressure inside the tank is no longer continued to decline, so that the outside of the tank and the tank pressure balance to protect the safety device of the storage tank.
,食品級呼吸閥,不銹鋼儲罐呼吸閥I無菌呼吸閥規格:DN25~DN50(MM)材質:304不銹鋼、316不銹鋼、316L不銹鋼插口:222(圓)、226(平)較常用過濾精度(um):0.22-100過濾容量(t/h):0.2
宏源閥門專業生產衛生級呼吸閥,衛生級灌頂呼吸閥,衛生級阻火器呼吸閥,衛生級取樣閥,衛生級清洗球,衛生級球閥,衛生級蝶閥,衛生級止回閥,衛生級過濾器,衛生級安全閥,衛生級管件等一系列衛生級閥門管件產品
宏源閥門宏源閥門銷售部始終遵循“不求zui大、只求”的經營原則,為廣大用戶提供及時、完善、全面的售后服務,歡迎您來電來涵治談咨詢
售后服務:
一、產品配發檢驗合格證書和使用說明書,以確保用戶能正確安裝使用我公司產品。
二、我公司保證出廠的產品均按有關國家標準生產和檢驗,不合格的產品決不出廠,保證嚴格履行、兌現產品三包,嚴格執行國家工業產品售后服務有關規定,對出廠產品自發貨日起十二個月內,在產品說明書規定的正常操作條件下我公司將負責保質期內質量完好。
三、用戶對我公司產品提出質量異議,公司保證在接到用戶提出異議后24小時內作出處理意見。若需現場解決的,保證派出專業技術人員,并做到質量問題不解決服務人員不撤離。對每件用戶反饋的產品質量問題及處理結果我公司將予以存檔。
以上三點是我公司對售后服務的承諾,真誠歡迎廣大用戶批評指正并提供寶貴意見參照改進。